I am using a 1/4 w.l. inverted-L for TX on 160 meters. Its ground radials
bus (consists of 52 wires, between 20 to 40 meters in length) is now located
nicely beneath the existing feed point on the ground.
But, I plan to to move my tx antenna to second floor (concrete deck) of my
house. I plan to connect the GND of tx antenna with single copper wire to
the available ground bus. The distance will be about 15 meters away plus
elevation about 4 meters high from where it is, now.
What significant effect will the antenna give if the ground bus is in such
separate distance, please? I'd appreciate any advices/tips very much. Tnx es
73 de Jo, YC0LOW
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|