To: | <Topband@contesting.com>, <gmc@mailman.qth.net> |
---|---|
Subject: | Topband: Titanex parts |
From: | "Joe - K8FC" <k8fc@k8fc.com> |
Date: | Wed, 6 May 2009 10:22:22 -0600 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Folks, I am trying (in vain) to obtain some Titanex V160S elements (top two) to repair my severely damaged vertical. I have struck out both with email and phone calls to Titanex in Germany. Specifically I need the three meter 20mm OD tube and the three meter 18mm top tube. I know there are a lot of these in use and there must be parts somewhere. If you can help with any information I would be very grateful. Thanks in advance, Joe K8FC _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Topband: 1.99 and 1.8 beacon in VE2, Claudio Fernandez |
---|---|
Next by Date: | Topband: K7RAT/B, Greg - ZL3IX |
Previous by Thread: | Topband: 1.99 and 1.8 beacon in VE2, Claudio Fernandez |
Next by Thread: | Re: Topband: Titanex parts, Joe Giacobello |
Indexes: | [Date] [Thread] [Top] [All Lists] |