Topband
[Top] [All Lists]

Re: Topband: Beverage Feed Line Choke Installation

To: <Topband@contesting.com>, "Missouri Guy" <n0tt1@juno.com>
Subject: Re: Topband: Beverage Feed Line Choke Installation
From: "Joe - K8FC" <k8fc@k8fc.com>
Date: Mon, 1 Jun 2009 19:37:14 -0600
List-post: <topband@contesting.com">mailto:topband@contesting.com>
I would add to this as well, all that Charlie said below as well as 
disconnecting the feedline from the remote antenna and terminating it in 
it's characteristic impedance and listening on the rx.  If you hear anything 
at your frequencies of interest you have common mode issues.  If it is dead, 
you should not have to worry about common mode chokes.

Empirical results from my experience.

/joe
----- Original Message ----- 
From: "Missouri Guy" <n0tt1@juno.com>
To: <Topband@contesting.com>
Sent: Monday, June 01, 2009 9:12 AM
Subject: Re: Topband: Beverage Feed Line Choke Installation


> Hi Gents,
>
> Jumping in with both feet on the thread....
> In my humble experience, common-mode chokes aren't
> really needed at all IF the antenna is disconnected from it's matching
> transformer and no Topband (or other frequencies of interest)
> signals can be heard in the receiver.   Experiment!  :)
>
> 73,
> Charlie, N0TT
> _______________________________________________
> Topband mailing list
> Topband@contesting.com
> http://lists.contesting.com/mailman/listinfo/topband
> 

_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>