Re: Topband: QRM Canceling Experience

[KEVIN ADAM <n9iww@msn.com>]

need help with eznec 5 to get the right load shunt coil i've modeled it but 
Don't know how to make the load work right.
here is my model  i can't go any higher if someone
                      EZNEC+ ver. 5.0

Vertical over real ground                    12/5/2009     11:36:13 AM

         --------------- ANTENNA DESCRIPTION ---------------

Frequency = 1.83 MHz
Wire Loss: Zero

              --------------- WIRES ---------------

No.          End 1   Coord. (ft)              End 2   Coord. (ft)       Dia 
(in)  Segs        Insulation
      Conn.      X       Y       Z     Conn.      X       Y       Z             
            Diel C  Thk(in)
1      W4E2        0,      0,13.1234    W2E2        0,      0,72.1785       #12 
  10          1        0
2            -55.774,      0,45.9318    W3E1        0,      0,72.1785       #12 
  10          1        0
3      W1E2        0,      0,72.1785          55.7743,      0,45.9318       #12 
  10          1        0
4            124.672,      0,3.28084    W5E2        0,      0,13.1234       #12 
  10          1        0
5            -124.67,      0,3.28084    W1E1        0,      0,13.1234       #12 
  10          1        0

Total Segments: 50

              -------------- SOURCES --------------

No.      Specified Pos.     Actual Pos.      Amplitude    Phase    Type
       Wire #  % From E1  % From E1  Seg       (V/A)     (deg.)
1       1         0.00       5.00    1          1           0         I

No loads specified

No transmission lines specified

No transformers specified

No L Networks specified

Ground type is Free Space

                                          
_______________________________________________
160 meters is a serious band, it should be treated with respect. - TF4M