On Mar 16, 2010, at 15:44:57, Jonathan white wrote:
>
> Hi everyone.
> I have had my top loaded vertical break on me again.
> The antenna is held up by a probably 70` eucalyptus tree,the top loading
> wires run away via insulators to pulleys and long elastic cords to take
> up execive movements during high winds.
> It has failed on me twice now after about 3 months .This time I used
> flexiweave and this has broken.
> Would it be ok to use say galvanized wire for the top loading wire.
> This antenna has been a star performer in the recent CQ WW 160 SSB
> Contest, furthest was Georgia and cape Verde islands.and got across to
> Pennsylvania,but he couldn't confirm my call sign due to local qrm.Not
> bad for 100w
> So I am reluctant to give this vertical up,Any suggestions from the team.
Do you have access to copperweld wire? That's what I would use in this
application.
I have several wires up using copperweld wire. I've had ropes and supports
break, but the antenna wire is still in one piece.
Hope this helps.
John K8AJS
bastinj@gmail.com
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|