Topband
[Top] [All Lists]

Re: [RFI] BCB interference on 160

To: "rick darwicki" <n6pe@yahoo.com>, "Group Topband" <topband@contesting.com>
Subject: Re: [RFI] BCB interference on 160
From: "Jeff Blaine" <jeff@ac0c.com>
Date: Tue, 13 Sep 2011 21:47:06 -0500
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
Rick,

For the HPF option, see this:

http://www.ac0c.com/main/page_antennas__homebrew_clifton_labs_z10022a.html

73, Jeff ACØC
www.ac0c.com

-----Original Message----- 
From: rick darwicki
Sent: Tuesday, September 13, 2011 9:42 PM
To: Group Topband
Cc: Group RFI
Subject: [RFI] BCB interference on 160

Hi all,

I recently built a sheilded RX loop for 160 per N6RKs Contest Jouranal artical. 
It is diode tuned and covers about 1.5-4 mhz. I am 
hearing two AM radio stations on 1830 khz.
They are 640 and 1190 combined. 640 is a 50KW station about 12 miles east and 
1190 runs about 1.5 kw at night.

The anetnna is all sealed up and on the roof. I would like to cure the problem 
without changing to back to back tuning diodes.

I'm thinking a series trap tuned to 1190 or 640 or both. Maybe a high pass 
filter.

Any suggestions? I can built it, I don't want to spent $200 for the W3s 
highpass hi hi


Thanks,

Rick, N6PE
=============================================================================
If I agreed with you we'd both be wrong.
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi 

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>