Topband
[Top] [All Lists]

Re: Topband: question about RX splitter

To: donovanf@starpower.net
Subject: Re: Topband: question about RX splitter
From: George Dubovsky <n4ua.va@gmail.com>
Date: Fri, 21 Oct 2011 08:54:35 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Or, if you don't want to do your own packaging, I have a large quantity of
new Minicircuits ZSC-2-1-75 available (same two-transformer design, although
smaller cores).

<http://www.minicircuits.com/pdfs/ZSC-2-1-75+.pdf>

They have 75 Ohm BNC connectors (100% mechanically compatible with 50 Ohm
BNC males). There is a 150 Ohm chip resistor inside that can be changed to
100 Ohm if you're working in a 50 Ohm system - I'll send you the resistor if
you ask.

$15 for 1, $12 for each additional, plus $5.25 for the small flat-rate box.

73,

geo - n4ua

On Thu, Oct 20, 2011 at 7:59 PM, <donovanf@starpower.net> wrote:

> This high performance 3 dB splitter kit is available from Clifton
> Laboratories for only $5.00 including first class postage within the USA.
> Overseas price is only $6.00 including first class (air) postage.   Easy
> payment via PayPal
>
> http://www.cliftonlaboratories.com/z10050a_3_db_hybrid.htm
>
> 73
> Frank
> W3LPL
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>