Ive run up to about 500' using extension cords and a Weller 8200. For deep
woods I lug a small automotive 12V battery and soldering iron. Radials to
ground rods are done with a propane torch.
Carl
KM1H
----- Original Message -----
From: "Kenneth Grimm" <grimm@sbc.edu>
To: "topband" <topband@contesting.com>
Sent: Saturday, August 04, 2012 1:22 PM
Subject: Topband: Soldering in the wild!
> After suffering through our infamous "derecho" here in Virginia, I find
> that I've got a* lot* of repair work to do on my beverages. Most of the
> breaks are in 450 ohm window line, located in remote areas and will
> require
> soldering. My "non-AC electric" soldering equipment seems to have been
> lost in the last move and I need to outfit myself with a "wireless"
> soldering device! I would be interested in what you use and if you are
> satisfied with the results. Thanks.
>
> 73,
>
> --
> Ken - K4XL
> BoatAnchor Manual Archive
> BAMA - http://bama.edebris.com
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2437/5176 - Release Date: 08/04/12
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|