Topband
[Top] [All Lists]

Re: Topband: Phased short vertical receive antenna system

To: Top Band Contesting <topband@contesting.com>
Subject: Re: Topband: Phased short vertical receive antenna system
From: James Rodenkirch <rodenkirch_llc@msn.com>
Date: Wed, 19 Nov 2014 05:08:46 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Ok OK....this is what I was remembering (courtesy of a reply from Larry):
 
Check out http://www.dxengineering.com/parts/dxe-aaps3-1p or page 77 of
their Autumn/Winter 2014 paper catalog. These receive antennas use 102"
whips. 
 
I think I'll go for a two element Hi-Z version - I can put up two 17' verticals 
and some 17' radials, spaced 40 to 50 feet....will work better than my 
top-loaded vertical....hi hi
 
Tnx to all for the rapid replies!!!!!!!!!! m72, Jim R. K9JWV

 
 
From: rodenkirch_llc@msn.com
To: topband@contesting.com
Subject: Phased short vertical receive antenna system
Date: Wed, 19 Nov 2014 04:14:12 -0700




I recall seeing a phased antenna system for the low bands that employed short 
vertical antennas....shorter than what is used in the system for sale at DX 
Engineering these days. I am envisioning an advertisement where the antennas - 
4 to 8 of them depending on how narrow of a pattern you desired - looked like 
whips....perhaps 8 to 10 feet tall....
 
Anyone know about what I have stuck up in my cranium or am I simply "losing 
it"?  
 
72, Jim Rodenkirch K9JWV
 
                                                                                
  
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>