Topband
[Top] [All Lists]

Re: Topband: Modeling a BOG

To: jbwolf@comcast.net
Subject: Re: Topband: Modeling a BOG
From: Mike Waters <mikewate@gmail.com>
Date: Sat, 21 Feb 2015 19:25:51 -0600
List-post: <topband@contesting.com">mailto:topband@contesting.com>
I have never heard of anyone burying a BOG. The radials could be buried an
inch or so, but a BOG should lay on the ground or slightly above. 2 ft. is
two feet too deep.

About 200' is a common length for a BOG on 160.

73, Mike
www.w0btu.com

On Sat, Feb 21, 2015 at 6:51 PM, James Wolf <jbwolf@comcast.net> wrote:

> I am trying to model a BOG (Beverage On or in the Ground). ... As soon as
> I drop the antenna below ground level, approx. 2 ft. without errors,  I
> lose all indication of directivity except for a few dB.   I have tried
> different lengths from 200 ft. to 800 ft.
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>