Topband
[Top] [All Lists]

Re: Topband: Modeling "Ground" and losses

To: <topband@contesting.com>
Subject: Re: Topband: Modeling "Ground" and losses
From: "Richard Fry" <rfry@adams.net>
Reply-to: Richard Fry <rfry@adams.net>
Date: Wed, 25 Feb 2015 06:27:02 -0600
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Radials do have standing waves, and so the minimum impedance at the base will appear when the radial is somewhat less than 1/4 wave long.

Of interest here is that the benchmark Brown, Lewis and Epstein I.R.E paper on ground systems does not show such standing waves along buried radials (clip below).

The clip also shows that the r-f current flowing on the buried wires at and beyond 0.25 lambda (of their physical length in free space) are considerably less for 15 and 30 radials than for 113 radials.

http://s20.postimg.org/oxj3qv59p/BL_E_Fig_7.jpg

R. Fry
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>