Bob,
Take a look at RFU502-H1 from RF industries. They sell for ~$35 each new.
I don't have experience with that particular connector, but I suspect it
will work just fine with your cable.
Otherwise the RFS connectors like the ones in your link are super easy to
install. I've installed about a hundred of them over the years.
Greg, N2GZ
On Fri, Jun 3, 2016 at 6:26 PM, Bob K6UJ <k6uj@pacbell.net> wrote:
>
> I need to have a PL-259 type connector on one end of a 1/2" cellflex cable
> I am making up. I have an N connector on one end, no problem. I like the
> EZfit connectors and was hoping to find one for UHF male (PL-259)
>
> I can get another N connector and then get a N to PL-259 adapter but I
> would
> prefer to not have an adapter if possible. I did find one (below) its not
> an Andrew
> EZfit but looks to be about the same thing. Know of other options ?
>
> http://www.theantennafarm.com/catalog/rfs-734745-5804.html
>
> Bob
> K6UJ
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|