I use these on my dummy loads.
Keep in mind that they need to be mounted on a heat sink and because of the
small size they don't handle surges like their larger brothers.
If there is a change of lightning strikes nearly you may want to parallel
> On January 27, 2017 at 12:35 PM "firstname.lastname@example.org" <email@example.com>
> I was looking for some non-inductive resistors for experimenting with
> This list is AMAZING!! Thanks for the replies, but it looks like Grant,
> KZ1W, has pointed me in the correct direction.
> <snip> Check out the Ohmite non-inductive 100w series
> Digikey stocks some values.
> Grant KZ1W
> Thanks to Grant and to all on the list.
> 73 K9WN Jake
> Topband Reflector Archives - http://www.contesting.com/_topband
Topband Reflector Archives - http://www.contesting.com/_topband