Topband
[Top] [All Lists]

Topband: JT65 Power and bandwidth

To: <Topband@contesting.com>
Subject: Topband: JT65 Power and bandwidth
From: Dennis W0JX via Topband <topband@contesting.com>
Reply-to: Dennis W0JX <w0jx@yahoo.com>
Date: Sat, 18 Mar 2017 18:48:22 +0000 (UTC)
List-post: <topband@contesting.com">mailto:topband@contesting.com>
FCC regs say you should use the minimum power necessary to establish 
communications. That might require more than 100 watts, perhaps even 1500 
depending on conditions, type of TX antenna, etc.

Regarding bandwidth, it is not necessary to run your SSB filter wide open for 
JT65. On my K3, I adjust the width downward to about 1300 Hz. It really helps 
with noise and QRM.

73 Dennis W0JX
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>