Topband
[Top] [All Lists]

Re: Topband: making a bev seem longer

To: Tim Childers K9CQ <k9cq@k9cq.com>
Subject: Re: Topband: making a bev seem longer
From: Edward via Topband <topband@contesting.com>
Reply-to: Edward <navydude1962@yahoo.com>
Date: Mon, 6 Aug 2018 15:40:15 -0700
List-post: <mailto:topband@contesting.com>
What about Array Solutions ASL-30?

Thanks,
Ed

> On Aug 6, 2018, at 3:20 PM, Tim Childers K9CQ <k9cq@k9cq.com> wrote:
> 
> I have been using the Hi-Z 3 element at 50 foot spacing that Lee designed. I 
> can tell you that the results for me were amazing and it gives you 6 
> directions.  It works quite well on 40, 80 and 160.  You can also find them 
> at DX Engineering.
> 
> Tim, K9CQ
> 
> 
> -----Original Message----- From: lee@k7tjr.com
> Sent: Monday, August 6, 2018 4:32 PM
> To: topband@contesting.com
> Subject: Re: Topband: making a bev seem longer
> 
> First let me apologize if you get this e-mail twice as I have been having
> problems with MSN.com.
> 
> Hi JC,
>  Not all vertical arrays are mono band. A well built 4-square on a 60 foot
> per side can do a stellar job on 160, 80, and 40 meters while extending well
> down into the broadcast band. The 3 element as well as the 4-square based 8
> element on an 85 foot diameter circle will do the same thing.
> 
> Lee   K7TJR
> 
> 
> ---
> This email has been checked for viruses by AVG.
> https://www.avg.com
> 
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>