Topband
[Top] [All Lists]

Re: Topband: VP6D

Subject: Re: Topband: VP6D
From: Grant Saviers <grants2@pacbell.net>
Date: Mon, 22 Oct 2018 11:39:18 -0700
List-post: <mailto:topband@contesting.com>
I know at least CW operator N7QT will operate diversity reception, not sure it was yet in operation.

Grant KZ1W

On 10/22/2018 10:57 AM, Tree wrote:
Sometimes - near your sunrise - angles go high and that diminishes
directivity quickly.

Congrats on the QSO!!

Tree N6TR

On Mon, Oct 22, 2018 at 10:56 AM David Olean <k1whs@metrocast.net> wrote:

I am not an expert on DX peditions, coming late to HF and 160 meters in
my life, but I could not get over the operator at VP6D this morning on
1.826.  Whoever it was, he was flying and getting the call correct the
first time every time.  I was amazed at how well they were doing racking
up the Qs.  There was plenty of QSB here in Maine with the signal going
from S 0.2 to about S6  on the S meter. At minimum, they were barely
copyable.  At best, they were loud. I used my Europe beverage and found
that it was a tad better than my SW beverage. I am not sure what was
going on there. The Europe wires is a pair of 1150 ft bevs, and the SW
wire is shorter at about 800 ft. After making a contact, I experimented
with diversity on the K3 and had the SW wire in my right ear and the 45
degree wire in my left ear.  Copy was better with diversity, but I think
I need to check my beverage terminations!! Maybe it was an arrival angle
situation that favored the longer wire's pattern.  I learn something
every day.

Dave K1WHS


_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>