Topband
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Topband: Rather use N-type (was Re: The answer to PL-259

from [Rob Atkinson] [Permanent Link][Original]
To: topband@contesting.com
Subject: Re: Topband: Rather use N-type (was Re: The answer to PL-259
From: Rob Atkinson <ranchorobbo@gmail.com>
Date: Tue, 11 Dec 2018 12:00:33 -0600
List-post: <mailto:topband@contesting.com> 
Some of you fellows who want to use Ns may benefit from this hint and kink:

https://www.radioworld.com/columns-and-views/repair-and-protect-type-n-connectors

Rob
K5UJ
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Topband: Shunt feed procedure?, kr9u
Next by Date:  Topband: identifying noise source, Maciej Wieczorek
Previous by Thread:  Re: Topband: Rather use N-type (was Re: The answer to PL-259, Jim Thomson
Next by Thread:  Topband: Fwd: Re: Rather use N-type (was Re: The answer to PL-259 soldering/reliability problems), F Z_Bruce
Indexes:  [Date] [Thread] [Top] [All Lists]