Topband
[Top] [All Lists]

Re: Topband: Hardening the 8 Circle Receiving Array

To: "'Mark Robinson'" <markrob@mindspring.com>, <topband@contesting.com>
Subject: Re: Topband: Hardening the 8 Circle Receiving Array
From: "Tim Duffy" <k3lr@k3lr.com>
Date: Thu, 17 Oct 2019 23:15:32 -0400
List-post: <mailto:topband@contesting.com>
Hello Mark:

Installing diodes can cause severe problems with nearby broadcast stations.

During the summer months and lightning months I remove my preamps from the 
antenna elements to protect them. 
I am now just getting them installed tomorrow morning to prepare for the Fall 
Stew contest on Saturday.

Be careful making modifications that may hurt your array performance

73
Tim K3LR

-----Original Message-----
From: Topband [mailto:topband-bounces@contesting.com] On Behalf Of Mark Robinson
Sent: Thursday, October 17, 2019 8:54 PM
To: topband@contesting.com
Subject: Topband: Hardening the 8 Circle Receiving Array

I  have the DX Engineering 8 circle receiving array sized for 80/160m . 
It has been a fantastic performer but I have suffered damage to the 
active antenna amplifiers on two separate occasions due to nearby 
lightning strikes.

I am looking at a way to protect these amplifiers.  I was wondering if I 
can add a pair or  dual series pair (4 diodes in total) of back to back 
diodes - say 1N3600,  across the input to ground terminals on each 
amplifier.  Will this affect the performance of the array in any way ?

73 Mark N1UK


_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector

<Prev in Thread] Current Thread [Next in Thread>