SigAssuming your interested in DX, your “L” with four elevated radials will
handily beat an inverted vee the vast majority of the time.
73. . . Dave, W0FLS
From: Peter Krulewitch
Sent: Sunday, April 19, 2020 12:12 PM
To: Joe
Cc: daraymond@iowatelecom.net ; topband@contesting.com
Subject: Re: Topband: Inverted V vs inverted L
I should have stated for the comparison that I have 4 elevated radials under
the inverted L W2LL
Sent from my iPhone
On Apr 19, 2020, at 12:49 PM, Joe <nss@mwt.net> wrote:
An Inverted "L" is more or less a vertical, but the upper half got bent
over correct?
So a major part of an inverted "L" just as in a regular vertical is the
ground system.
Correct?
Now how elevated radials work great in a regular vertical, only need like 4
to equal miles of wire in ground mounted radial field.
Will elevated radials work for an inverted "L"?
How about few and shorter than full length elevated radials as in a N6BT
design?
Joe WB9SBD
<CLEAN-IDLE-TYME-LOGO-120x96.jpg>
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 4/19/2020 11:35 AM, daraymond@iowatelecom.net wrote:
The inverted L will out perform and inverted vee, hands down, 90% of the
time. The few exceptions will probably be near your local SR (and other times)
when horizontal polarization can work better. 73. . . Dave, W0FLS
-----Original Message----- From: Peter Krulewitch
Sent: Sunday, April 19, 2020 11:28 AM
To: topband@contesting.com
Subject: Topband: Inverted V vs inverted L
Have used inverted L with 90 apex for several years but wonder whether
comparison tests or experiences with inverted V at that height compares. Tnx
fer your ideas.W2LL
Sent from my iPhone
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|