| To: | topband@contesting.com |
|---|---|
| Subject: | Re: Topband: How good is good enough |
| From: | Wes <wes_n7ws@triconet.org> |
| Date: | Sun, 13 Nov 2022 09:51:33 -0700 |
| List-post: | <mailto:topband@contesting.com> |
Good point. I have a permanently connected 20K 10W wire wound resistor on my
inverted-L feedpoint.
Wes N7WS On 11/12/2022 5:21 PM, Lee STRAHAN wrote: And don't forget to discharge the element to ground before connecting to your measuring device. Static is NOT your friend in this case. Lee K7TJR _________________ Searchable Archives: http://www.contesting.com/_topband - Topband Reflector |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: How good is good enough, m.r.c. |
|---|---|
| Next by Date: | Topband: Condx 160m today in DL, Andree DL8LAS via Topband |
| Previous by Thread: | Re: Topband: How good is good enough, Lee STRAHAN |
| Next by Thread: | Re: Topband: Dipole/remote tuner, jcjacobsen via Topband |
| Indexes: | [Date] [Thread] [Top] [All Lists] |