I don't think I've ever read anything about this. Just rechecked the
Array Solutions manual and found nothing. Reason for asking is that I
have to replace my fiberglass mast, and while the old one was about 25
feet tall, the new one is 31. That raises the possibility that I can
put the bottom of the loops 5 feet higher, or change the shape of the
loops, which currently have their bottom legs more or less parallel to
the ground.
Diagrams I have seen generally show included angles at the outer points
of each loop to be well under 90 degrees, and the lower segments almost
parallel to the ground. Has anyone experimented with this? What about
the usual shape, but higher off the ground? I have 4X30' radials plus a
ground rod, with the radials laid under and in line with the elements
--
73, Pete N4ZR
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|