At 07:48 AM 10/7/96 -0600, you wrote:
>At 11:25 PM 10/6/96 -0400, you wrote:
>>Fellows: PLEASE!!! PLEASE!!! PLEASE!!! DO NOT USE EMT FOR TOWER
>>WORK!!!!!!!!!!!!!!!!!
>>
>>If you must be "Cheap" with your mast material please use at least the
>>Chain link fencing posts or top rails, at least this stuff is "Designed"
>>to be used outdoors. A trip up the tower to remove even a vertical that
>>is attached to a bent piece of mast material is no fun!!
>>
>>Reagrds................. Jack
>
>
>
>Fellows: PLEASE!!! PLEASE!!! PLEASE!!! DO NOT USE CHAIN LINK
>FENCE FOR TOWER WORK!!!!!!!!!!!!!!!!!
>
>
>I would even be very suspicious of chain link fence toprail! I have seen some
>of the stuff that is not tubing at all--just a piece of flat stock that is
>rolledinto a cylinder and then galavanized.
OK. How about schedule 80 pipe?
Craig Clark
soon to be ex-NX1G
send me e-mail and I'll put you on our mailing list
Radio Bookstore
Books for Amateur Radio, SWL and CB Radio Operators
(603) 899 6957
(603) 899 6826 fax
PO Box 209
Rindge, NH 03461
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|