Towertalk
[Top] [All Lists]

HAM-type rotors and connectors

To: <towertalk@contesting.com>
Subject: HAM-type rotors and connectors
From: k5uo@contesting.com (Mike Bragassa)
Date: Fri, 10 Jan 1997 05:15:23 +0600
I have used the C.A.T.S. Quick Disconnect (QD) for , I am sure, 8 years and
never had the two problems you mentioned. My suggestions/comments:

1.  I realized early on  that the male connector looking down out of the
motor was a form of plastic and when in storage could be damaged. I would
put  4-5 of the plate bolts in their respective holes in the motor as
"legs". Cured that risk. Another solution would be to put a spare female end
on as a 'cover'.

2. Wind erosion damage? Never evidenced that problem. In 3 years of usage in
windy/sandy Casper Wyoming and now almost 6 years in (what I call) very
little wind and sand South Texas: Nyet problemo.(No problem)

I don't know if there is a metal connector available? I suspect it can be
damaged, while in storage just as well, without some form of protection. 

Thanks and best regards

Mike K5UO

...............................................................<<>>.........
..................................................................

At 03:10 AM 1/10/97 -0100, you wrote:
>n4si wrote:
>> 
>> As long as we're on the subject of HAM (CDE) style rotors, let me
>> expound on the greatest improvement since their invention: C.A.T.S.'s
>> Quick Disconnect modification. For the paltry sum of $15 (or so) you
>> get a QD weatherproof connector assembly with 8 sets of gold pins and
>> sockets.
>
>actually i have to disagree; i had this put on my rotator several yrs
>ago and im very sorry i did. its a mechanical weak point since the point
>where the quick disconnect joins the rotator is VERY fragile and tends
>to wear quickly in the wind, or with stress on the cable. since you only
>replace rotators every few yrs, go with some other type of arrangement.
>this is a weakness than CAN cause you to replace the rotator
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 K7LXC@contesting.com
>Sponsored by Akorn Access, Inc & KM9P
>
>
Mike Bragassa,K5UO & R3/K5UO
Conroe. Texas: k5uo@contesting.com
Moscow, Russia: bragassa@glasnet.ru


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>