In a message dated 97-01-11 23:15:55 EST, you write:
> I use a T2X on a rotator shelf in the standard place (one or two
>feet down from the top) in my Rohn 25G. It does fit. It won't fit
>further down without (1) cutting a diagonal, or (2) inserting it between
>the 8 foot top section and the first 10 foot section below that.
>
Hi, Fred --
In looking in my Rohn catalog, it appears that there are several top
sections that will work. I guess the biggest problem would be using a BPL25G
Top Bearing Plate on the top of a straight section so it depends on which top
configuration you're using.
73 and tnx for your comments, Steve K7LXC
TOWER TECH -- professional tower supplies and services for amateurs
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P
|