Towertalk
[Top] [All Lists]

FT1000MP SERIAL NO.

To: <towertalk@contesting.com>
Subject: FT1000MP SERIAL NO.
From: jlockj@minn.net (John Lockhart)
Date: Fri, 31 Jan 1997 09:05:42 -0600
Just an (another) observation...I run an "MP" now with
all filters.....also had a "D".....preferred the "MP".......
sold the "D"

Worked HI on many bands and modes and never had 
the problem described below unless noise blanker was on.

73,

John  W0DC

----------
> Secondly, I just bought an MP about a month ago. Got it for our summer
> place. Sat it beside my 1000D and
> used them both for the Heard Island thing. I really liked the MP. Bought
> the 250cy filters {2} and the 500cy for the "B" receiver. I found one
> SERIOUS problem. Adjacent freq strong signal rejection is VERY poor.
Example:
> On 80m CW The DX is at 3522 listening up 5+. I hear key clicks, 100s of
key
> clicks that raise the "noise" level on 3522 to S9 PLUS making it almost
> impossible to copy the weak VK0. I turned on my 1000D, threw the ant
switch
> and it was almost totally gone. 
> 


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>