Towertalk
[Top] [All Lists]

[TowerTalk] Modifying AUTEK's antenna analyzer? -Reply

To: <towertalk@contesting.com>
Subject: [TowerTalk] Modifying AUTEK's antenna analyzer? -Reply
From: n4zr@contesting.com (Pete Smith)
Date: Fri, 21 Mar 1997 12:10:18
At 07:52 AM 3/20/97 -0800, Bryan Sparrowhawk wrote:
>It would seem that if the Autek RF-1 could be modified to have an
>analog meter showing SWR simultaneously with the digital Freq display
>AND if the controls could be modified to be less sensitive.. it would
>be the premier instrument.  Do any of you Autek owners think that
>would be possible/practical?
>
>de KD7LS


A lot of folks seem to have missed the fact that you can hold down the FREQ
and SWR buttons on the RF-1, release them at the same time, and the display
then cycles between the two readings about once a second.  Not as good as 2
displays but a lot better than switching manually.

73, Pete Smith N4ZR
n4zr@contesting.com 


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>