| To: | <towertalk@contesting.com> |
|---|---|
| Subject: | [TowerTalk] guy wire tightening (and forged/malleable clamps) |
| From: | psoper@encore.com (Pete Soper) |
| Date: | Tue, 22 Apr 1997 09:44:38 EDT |
Steve K7LXC writes: (nice tensioning primer omitted) > These figures are for guys 45 degrees to the horizontal. Is there a formula for computing guy tension at other angles? Regards, Pete KS4XG -- FAQ on WWW: http://www.contesting.com/towertalkfaq.html Submissions: towertalk@contesting.com Administrative requests: towertalk-REQUEST@contesting.com Problems: owner-towertalk@contesting.com |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [TowerTalk] Information needed, K7LXC@aol.com |
|---|---|
| Next by Date: | [TowerTalk] crankup advice, PEMS_ST_DK@noeca.ohio.gov |
| Previous by Thread: | [TowerTalk] guy wire tightening, K7LXC@aol.com |
| Next by Thread: | [TowerTalk] CC&R's, Terry Dunlap |
| Indexes: | [Date] [Thread] [Top] [All Lists] |