Towertalk
[Top] [All Lists]

[TowerTalk] Mast strengths

To: <towertalk@contesting.com>
Subject: [TowerTalk] Mast strengths
From: dickrts@texoma.net (Dick Weber)
Date: Wed, 30 Apr 1997 17:39:17 -0500
Hi Steve,

        It is the ratio of the section modii of each mast. The 3"OD x .25 wall 
is 2.54 times stronger than a 2"OD x .25 wall tube of the same material. 154% 
more.

73,

Dick, K5IU 
--------------------------------------------------------------------------------------------------------------------
----------
From:   K7LXC@aol.com[SMTP:K7LXC@aol.com]
Sent:   Wednesday, April 30, 1997 1:21 PM
To:     towertalk@contesting.com
Subject:        [TowerTalk] Mast strengths

TowerTalkians --

     My question for y'all (I'm from South Snohomish County) has to do with
the relative yield strength of a 3 inch mast versus a 2 inch mast.  Let's
assume that they are the same material (4130 - 75,000 psi yield) and the same
wall thickness (0.250").  How much more load will the 3 inch take over the 2
inch at the same windspeed?  I'm not looking for a paper on this, I just want
an idea of the relative approximate difference.  Is it 20% more, 30% or what?

       Thanks!

73,  Steve  K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>