Towertalk
[Top] [All Lists]

[TowerTalk] Ham-4 rotor Capacity (fwd)

To: <[email protected]>
Subject: [TowerTalk] Ham-4 rotor Capacity (fwd)
From: [email protected] ([email protected])
Date: Thu, 3 Jul 1997 10:50:01 -0400 (EDT)
In a message dated 97-07-03 00:23:12 EDT, [email protected] (David O Hachadorian)
writes:

> On Tue, 1 Jul 1997 13:53:32 -0700 (PDT) Pat Barthelow <[email protected]>
>  writes:
>  
>  >will the Ham-4 handle any of the followinng antennas:
>  >
>  >1. Cush craft 20 Meter Monobander, CD 20-4
>  >2. Hy Gain KT-34XA, 32 ft. boom
>  >3. Cushcraft 2el 40 meter
>  >4. KLM - Custom, 5 el 20, 56 ft Boom
>  >5. KLM 5 element, 15 meter  beam, 35 ft boom.
>  
    What you need to do if determine the Effective Moment (EM) of each
antenna and match it up against the EM figure in the Hy-Gain catalog.
Effective Moment is the turning radius times the weight. For example, the
20-4CD is 23.75 X 55 = 1306 ft.lbs. of EM; the rating of the Ham IV is 2800
ft.lbs.  

     BTW, the MARC (Mast, Antenna and Rotator Calculator) Program calculates
the EM and recommends an appropriate rotator.

73,  Steve  K7LXC

    TOWER TECH -- professional tower supplies for amateurs

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              [email protected]
Administrative requests:  [email protected]
Problems:                 [email protected]
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>