These are all jpeg (jpg) and for detail, on order of
100 to 200 kbyte. 10" x 8" at 72dpi
40 meter 3elements approx 42' overall fasten to these centers
and a coffee can sized plastic (coil?) lives at center just
over the U-bolt. Standoff are insulators. So far suggestions
are that this is an older Mosley. 3" boom dia.
<http://www.atl.org/antennas/40meter.jpg> 123k
40m element halves (6 total) half element approx. 26'
plus the elements from as of yet unidentified
Mosley 3 ele yagi (CL33? TA33? 10/15 only?)
8' center to trap, 12 center to end.
<http://www.atl.org/antennas/elements.jpg> 81k
Crank up tower: model?? manufacturer??
http://www.atl.org/antennas/TOWER3.jpg 134k
base section
<http://www.atl.org/antennas/TOWER2.jpg> 159k
<http://www.atl.org/antennas/TOWER9.jpg> 212k
bottom brackets for anchors
<http://www.atl.org/antennas/anchors.jpg> 182k
brackets to left for winch
<http://www.atl.org/antennas/WINCH2.jpg> 133k
pulleys at tops of sections.
<http://www.atl.org/antennas/TOWER8.jpg> 225k
Me, after digging the crankup out from under 8 years growth
of weeds, taking down a 50' Rohn 25, and moving them and
all the antennas (3 ele HF yagi, 6m yagi, and 2m collinear were
all up!) home. Marty AA4RM helped and I'll get a photo of him
next time he comes over.
<http://www.atl.org/antennas/bob2.jpg> 72k
The crankup was moved with ease by a 'flat bed' type
wrecker for only $81. Got to thinking, Truck, ramp,
come-along....and realized that the wrecker had it all plus
additional help.
-bob
wb4mnf
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|
