James W. Fisher, Jr. wrote:
>
> I'm putting up a number of verticals in free-standing and 4-square formats.
> My future radial fields will include some elevated systems where practical
> and not too obtrusive plus some on-the-surface systems. For some, I may
> use the ON4UN-described combined approach of two elevated radials plus an
> extensive ground radial system (the latter connected to the shack end of a
> coax choke feeding the antenna).
>
> Question 1: what commercial or homebrew approaches are appropriate for
> connecting a growing number (as I get time) of radials at the center of the
> field? I seem to recall an aluminum wheel with 32 bolts at the perimeter
> but don't know if or where such a thing is available now.
Lance Johnson Engineering sells this, although it's 25 bolts rather than 32.
(303) 646-4630 or [email protected]
Rolfe, W1VC
--
Rolfe Tessem | Lucky Duck Productions, Inc.
[email protected] | 96 Morton Street
(212) 463-0029 | New York, NY 10014
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: [email protected]
Administrative requests: [email protected]
Problems: [email protected]
Search: http://www.contesting.com/km9p/search
|