I have used the following:
- aluminum plate that I mounted many stainless steel bolts each with
several large flat washers and nuts.
- Drilled (and ruiuned several drill bits) an old hubcap and mounted
long screws.
They all worked well.
73
------- Forwarded Message Follows -------
To: <towertalk@contesting.com>
Date: Sun, 14 Sep 1997 22:04:33 +0900
From: Tom Osborne <w7why@mail.coos.or.us>
Organization: Amateur Radio W7WHY
To: "James W. Fisher, Jr." <74237.2073@compuserve.com>
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Radial connections and insulation
James W. Fisher, Jr. wrote:
>
> Question 1: what commercial or homebrew approaches are appropriate for
> connecting a growing number (as I get time) of radials at the center of the
> field? I seem to recall an aluminum wheel with 32 bolts at the perimeter
> but don't know if or where such a thing is available now.
>
> TNX es 73, Jim Fisher, VE1JF/W8JF
Hi Jim. They also have an E-mail address. It is lance@diac.com. 73
Tom W7WHY
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|