Scott, the specs on the 9913F are a bit different than those you've
listed, but not critically. Belden revises specs periodically based on
continuing mfg feedback and minor mods. Of interest: (9/10/97 rev)
Nom. Attenuation:
1.5@100MHz
2.8@400MHz
VF 84%
Cap 24.6pf/ft
Jacket "Belflex" (a rubber-like PVC compound)
Bend Radius 4"max
Max Temp. 80 deg C
Nominal life (10 yr, Warranty)
Current cost (WM) $0.75/ft, $0.70/ft/100-499ft, $0/.69/ft/500/999ft,
$0.68/ft/1000ft, all custom cut.
The stuff is great for V & UHF, actually less loss than 100 ft of HL plus
jumpers at a fraction of the cost. The true loss of your assembly is more
significant than the individual ratings of any tx line.
HF at your lengths mentioned is well covered by 213 types, unless money
is no object or QRP and/or competitive DX are factors.
WM has 4 variations of it for general and specific uses, at good prices.
Also 6 varieties of 8X for particular needs.
73,
Press Jones, N8UG, The Wireman, Inc., Landrum, SC 29356
use n8ug@juno.com or (864) 895-4195 for tech help
orders only use 800-727-WIRE(9473) or cqwire@juno.com
http://www.thewireman.com
THE WIRE LINE(http://thewireman.com/wireline.html)
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|