After stripping the desired length of outer covering tin the braid and cut
it to length with a retractable razor knife.
Jim Bruce/NV3V
brucecom@shore.intercom.net
President/Owner
Bruce Communications, Inc.
-----Original Message-----
From: Len Schaier <schaier@avotec.com>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Wednesday, December 03, 1997 07:57
Subject: [TowerTalk] Stripper for RG 213
>Hello all,
>
>I'm going bananas trying to make up good, clean, RG213 - PL239 connections.
>A big part of my problem is my "stripping" technique. Can anybody suggest a
>good stripper that will do RG213 and where I might be able to buy it.
>
>Thanks in advance.
>
>Len
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|