[TowerTalk] The solution for torque relief on BX towers

Towertalk

[TowerTalk] The solution for torque relief on BX towers

To:	<[email protected]>
Subject:	[TowerTalk] The solution for torque relief on BX towers
From:	[email protected] ([email protected])
Date:	Tue, 3 Feb 1998 17:18:31 -0500

One way to alleviate any potential torque issue is to mount the rotator at
the base and run a mast all the way up the tower!
Even mounting it part of the way down should help a lot.

73, Ty K3MM



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              [email protected]
Administrative requests:  [email protected]
Problems:                 [email protected]
Search:                   http://www.contesting.com/km9p/search

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TowerTalk] The solution for torque relief on BX towers, [email protected] <= [TowerTalk] The solution for torque relief on BX towers, Steve Maki [TowerTalk] The solution for torque relief on BX towers, DOUG WALLER

Previous by Date:	[TowerTalk] Rohn BX/HBX/HDBX and Boom Length, Floyd Soo, W8RO
Next by Date:	[TowerTalk] 160/80M Shunt Fed, Jerry Morris - W5MS-W5KUF-Corpus Christi Amateur Radio Club
Previous by Thread:	[TowerTalk] Rohn BX/HBX/HDBX and Boom Length, Floyd Soo, W8RO
Next by Thread:	[TowerTalk] The solution for torque relief on BX towers, Steve Maki
Indexes:	[Date] [Thread] [Top] [All Lists]