The following was received from F6EXV who is in Chile. He is not a
subscriber to this reflector (unfortunately, Frogs ar no no's) so please
reply to Paul directly at
f6exv@chilesat.net
Thanks...Stu
________________________________________________________
To: <towertalk@contesting.com>
>Date: Fri, 3 Apr 1998 21:02:02 -0400 (CST)
>X-Sender: f6exv@chilesat.net (Unverified)
>X-Mailer: Windows Eudora Light Version 1.5.2
>To: wa2moe@doitnow.com
>From: Paul GRANGER <f6exv@chilesat.net> (by way of Paul GRANGER
<f6exv@chilesat.net>)
>Subject: Help needed on Kenpro rotor
>
>Hi all !
>
>I have recently moved into a new location and was lucky to hire a home with
>a tower and a 3el beam on it.
>There is a rotor below the antenna, and a KENPRO control box at the station,
>but I doubt the control box corresponds to the rotor.
>Before I envisage to take the antenna down, can someone help me with this
>problem ?
>There are 6 cables coming down from the rotor, while the control box has 8,
>but two (lowest right) seam to be unused.
>Could someone tell me what is what at the control box end ?
>Thank you very much
>
>Best 73
>Paul
>CE3/F6EXV
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|