Towertalk
[Top] [All Lists]

[TowerTalk] Cutting Cable

To: <towertalk@contesting.com>
Subject: [TowerTalk] Cutting Cable
From: K7LXC@aol.com (K7LXC)
Date: Wed, 6 May 1998 01:25:45 EDT
In a message dated 98-05-06 00:35:59 EDT, kz5qdx@COMMUNIQUE.NET writes:

<< I've seen  bolt cutter blades ruined trying to cut cable.  >>

      Most cutters are for softer materials than EHS cable. EHS will ruin just
about any cutting tool. 

     Some interesting ways to cut it have been mentioned. Who said
TowerTalkians weren't resourceful? I still prefer a hand grinder. I cut some
EHS today and it took about 3 seconds for 3/16. Had to use the grinder to cut
some rusty hardware too so it paid for itself again.

Cheers,  Steve   K7LXC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>