Towertalk
[Top] [All Lists]

[TowerTalk] More Guy Anchors

To: <towertalk@contesting.com>
Subject: [TowerTalk] More Guy Anchors
From: n7ml@imt.net (Michael Lamb)
Date: Mon, 29 Jun 1998 21:57:16 -0600


----------
From:   Chuck Sudds[SMTP:csudds@probe.net]
Sent:   Monday, June 29, 1998 1:03 PM
To:     towertalk@contesting.com
Subject:        [TowerTalk] More Guy Anchors

Chuck:  It seems to me that you put concrete under a guyed tower to keep it 
from sinking into the ground because of the vertical component of forces from 
the guy wires.  I think you would be far better off with less concrete spread 
out over a wider area under the tower.  The rohn tower catalog give full specs 
for what they recommend, it is not very much!

73/Mike, N7ML


I am getting ready to install my 80ft of Rohn 45G. I have the base and all
three of the guy-anchor spots marked off, out in my "North 40." Rather than
manually digging these holes, I was planning on enlisting the services
(again) of my Rural Electric Company, and their power pole auger. I plan to
have them auger down about 8-9 ft and about 18-24" in diameter. Does anyone
see a problem with round guy anchor bases?? I do plan to have elevated guys,
about 4-5ft out of the ground.
Looking forward to ALL replies, mispelled or not ;)


Chuck Sudds  K0TVD
Missouri Valley, Iowa USA

http://www.probe.net/~beakers/


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm





--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>