Don't know but a few years ago I did phone Telrex for a similar piece - they
were still open Tuesday and Thursday mornings to sell parts - and was quoted
a price of $120! I found a different solution. 73 - Rich, KE3Q
-----Original Message-----
From: Patrick Barkey <pbarkey@gw.bsu.edu>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Thursday, July 02, 1998 11:13 AM
Subject: [TowerTalk] Source for tapered aluminum?
>
>In reassembling a Telrex antenna, I find that one of my pieces of element
>tubing is bent. Its a twelve foot piece of 1.375" tubing, tapered at each
>end to 1" (to mate with a .875" tip). Its .058 wall.
>
>Does anyone have any experience trying to purchase tapered aluminum
>without going back to the antenna manufacturer? (Which is not an option
>in my case).
>
> -- Pat
> N9RV
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|