I have personally had a lot of heartache because of the copper paste
that KLM
supplies for use on aluminum. It not only causes bad contacts, but it
generates corrosion that weakens the strength of the aluminum tubing.
SUGGESTION: Use either "Penetrox" or "Noalox". Both of these
products have
been time proven by hams and found to be most satisfactory for use on
aluminum
tubing. There may be some other good products too, but with these 2
you can be
sure!!
73,
Riki, 4X4NJ
WBH3@chrysler.com wrote:
> HELP!
>
> Had above antenna up for about 5 years and then I had to move. Now, 15
> months later I am ready to put it back up. I checked in my Towertalk
> file on KT34's and found several references to how to go about refurbishing
> this antenna but.....
> none of the internet sites mentioned in the articles seem to be acitve
> anymore!! Can someone give me some additional references or someone to
> contact to for this information.
>
> Right now, I am using something called "OX-GARD by GB" which I got at Home
> Depot to coat the fittings where the antenna elements connect together at
> the boom. I don"t know or have a feel whether it is necessary to do a
> complete disassembly and re-coat all the places the assembly manual says
> to put the originally supplied copper paste. My feelings right now are to
> finish the assembly and then stand it on the director end and attach the
> coax and see how it plays. Incidentally, I've also seen a comment that the
> copper paste undergoes a magical process and turns into an insulator
> medium.
>
> In reading various threads it seems that some people have bad luck doing a
> dissassembly and some don't, AND some don't do anything and the antenna
> plays ok. There seems to be no statistically significant way to approach
> this problem. At any rate, I'm trying to get this antenna up within a
> week and need some advice ASAP. The site that I tried to reach was
> www.qsl.net/k7on/ant/antenna.htm. I haven't had a chance to measure
> between the 10 and 15 meter capacitor tubes yet.
>
> Thanks in advance.....I'll let everyone know how I make out !
>
> Bill Haselmire WX8S
> wbh3@chrysler.com
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|