Don't do it! The tower you talk about is rated 16 sq ft at 87 mph. At
80mph its rated at 19.2 sq.ft.
Read the specs and you'll see that you're grossly overloading it.
73 de Brian/K3KO
barrie99@marsweb.com wrote:
>
> Hello:
>
> I'm new here, so I hope I have the right questions!
>
> I have a 18" face, 70' Glenn Martin tower, with hazer. I'm in the
> (nervous) process of building a 28' wide by 30' high H-frame for 4 30'
> boom 6M yagis. I'm using the M2 az and elevation rotators.
>
> My claculations indicate that I'll have about 30 square feet on the
> tower.
>
> I lost a similar tower with about 40 square feet on it a few years ago
> in a freak, 110 MPH wind storm. I was only guyed at the top at that
> time. That tower withstood winds of near 70 MPH several times.
>
> Gurus told me that the reason the tower came down was because I was not
> guyed at lower levels, and the tower "bowed".
>
> It is very unusual for the wind to blow over 70 MPH at my location, but
> evidently it can.
>
> I'd like to guy this new installation more securely. I will guy at the
> top, of course. Should I then guy once more, or twice more?
>
> Any input will be appreciated, especially those with experience with the
> strengths and weaknesses of the Glen Martin tower and hazer.
>
> Thank you, Barrie, W7ALW, DN36au
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|