Towertalk
[Top] [All Lists]

[TowerTalk] Prop Pitch Motors

To: <towertalk@contesting.com>
Subject: [TowerTalk] Prop Pitch Motors
From: n4cc@ezl.com (Greg - N4CC)
Date: Thu, 31 Dec 1998 11:57:21 -0600
Happy New Year to all....
Recently I acquired 2 prop pitches and when I 
started to look into restoration, I discovered that
both have 12 V stamped on the motors.  The
motors are in very nice condition.  The "problem"
is all of my other pp's and controls are for
24V.  I had never heard of 12 V motors being used
on prop pitches but...I have now...hi.  My question
is this -- is there anyone out there who uses 12 V
motors who may have 24 V spares that he would
trade?  The motors are interchangeable -- just
different voltage.  I don't necessarily want to swap
the gear assemblies...just the motors.  Thanks
and 73 de Greg-N4CC 

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>