Thanks for all the input concerning the sheared off bolts in my Ham-IV
rotator. The unit is off the tower and I've got the bolts out. Now to
reassemble everything. I've followed the thread about using lock-tite.
However, the manual says to use grease and so does the local machine shop.
Anything wrong with using plain old grease on the threads?
Thanks for the help.
Gerry, W1XY
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|