There is a company called Chicago Hardware that makes a fair range of SS
hardware, U-bolts that fit Rohn 25 & 45G tower legs, for instance. McMaster
Carr is a distributor, or call your nearest nut/bolt/washer/fastener
dealer...they may very well carry the Chicago Hardware line. Keps nuts
instead of nylon lock nuts will keep SS bolts from galling.
Chicago Hardware & Fixture Company
9100 Park Lane
Franklin Park, IL 60131
(847) 455-6609
Fax: (847) 455-0012
At 10:27 PM 2/28/99 -0500, you wrote:
>
>Thought we came up with an inexpensive source for SS #304 and #316 SS
>harware, but cant locate it in the archives. Anybody know where to buy
>that stuff inexpensively? Taking apart a used antenna that I picked up
>and almost all the hardware is galled from either over tightening or
>aluminum corrosion, leaving me no choice but to replace it. Got a ton to
>buy, so a cheap source is needed.
>Thanks,
>Bob, K3GT
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
73,
Robin E. Midgett KB4IDC
rmidgett@edge.net
1/2 of the NT4L Rover Team
http://kq4tv.aprs.net/vhf/vhf.html
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|