Towertalk
[Top] [All Lists]

[TowerTalk] Ameritron RCS-8V Remote Coax Switch

To: <towertalk@contesting.com>
Subject: [TowerTalk] Ameritron RCS-8V Remote Coax Switch
From: W8JI@contesting.com (Tom Rauch)
Date: Sun, 21 Mar 1999 00:34:33 -0500
Hi all,

The system will work with over 5 volts of conductor drop. Even 50 
ohms of loop resistance in the conductors should be safe.

Number 26 copper is about .04 ohms per foot. That means you can 
use number 26 for any run up to 1/8 mile if there is no other ground 
return, and longer with a ground return.

I use telco wire, because it is cheap. Use stranded wire if the wire 
is subjected to flexing.


73, Tom W8JI
w8ji@contesting.com


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>