Towertalk
[Top] [All Lists]

[TowerTalk] Antenna Switch Cabinet

To: <towertalk@contesting.com>
Subject: [TowerTalk] Antenna Switch Cabinet
From: w2up@mindspring.com (Barry Kutner)
Date: Mon, 19 Apr 1999 20:36:36 -0000
I've drilled a bunch of 1/4 inch holes next to each other and used a 
small, flat file to finish the shaping. Works great when you don't 
have too many and it's an aluminum or plastic box...
73 Barry

On 19 Apr 99, George Cutsogeorge wrote:

> 
> 
> >I've also toyed
> >with the idea of using a data switch box which already has 3 or
> more
> >connectors installed.
> 
> 
> These boxes are cheaper than buying a blank Bud box and they
> already have the DB connector holes in them.  See the web site
> for Computergate.com.  The connectors have long leads on them and
> may be reused.  I use these boxes for switching Band Decoder
> outputs between two towers, etc.
> 
> George
> W2VJN
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
> 


--
Barry Kutner, W2UP              Internet: w2up@mindspring.com
Newtown, PA         FRC         alternate: barry@w2up.wells.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>