In a message dated 99-07-24 19:35:56 EDT, henry@pacinfo.com writes:
> To do some begining calculations, I need a few dimensions.
>
> The projected surface area of Rohn 45g (and 25g, to save me from having to
> ask again), like square inches of surface area for 1 foot of tower, face or
> leg frontal.
The Rohn catalog lists the cross sectional area as .913 square inches
for 45G. It's .726 for 25G. I think that's what you're looking for.
> A conversion between mph and psi for wind loading, like a wind speed of X
> mph corresponds to a wind pressure of Y lb.s per square inch.
>
10 PSF = 50 MPH
14.4 PSF = 60 MPH
20 PSF = 70.7 MPH
30 PSF = 86.6 MPH
40 PSF = 100 MPH
50 PSF = 111.8 MPH
60 PSF = 122.5 MPH
86 PSF = 147 MPH
Cheers, Steve K7LXC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|