To: | <towertalk@contesting.com> |
---|---|
Subject: | [TowerTalk] Yaesu G-1000 Control Wiring Solved |
From: | wb5b@dallas.net (Bobby Webb) |
Date: | Fri, 17 Sep 1999 22:28:28 -0500 |
Although the G-1000 manual says "Pin 6 (center pin) is not used", the wiring is straight through 1-5 on the round rotor connector, disregarding that Pin 4 is the center pin ! Thanks to N3SL -- FAQ on WWW: http://www.contesting.com/towertalkfaq.html Submissions: towertalk@contesting.com Administrative requests: towertalk-REQUEST@contesting.com Problems: owner-towertalk@contesting.com Search: http://www.contesting.com/km9p/search.htm |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [TowerTalk] Yaesu G-1000 Control Wiring, Bobby Webb |
---|---|
Next by Date: | [TowerTalk] Re: Shunt Fed Tower, Bob Thacker |
Previous by Thread: | [TowerTalk] Yaesu G-1000 Control Wiring, Bobby Webb |
Next by Thread: | [TowerTalk] Re: Shunt Fed Tower, Bob Thacker |
Indexes: | [Date] [Thread] [Top] [All Lists] |