Hi George,
Try pouring Hydrogen Peroxide over the stuck joints and let it seep into
the seam. It might take a while but the aluminum sections will come
apart it they are not crimped together. You should be able to separate
them with bare hands.
73, Bob, W5AH
George Mitchell wrote:
>
> Hello All,
> This is my first post to the list but figured if anybody could help, it
> would be here.
>
> I have 3-Element tri-bander that has been up for several years. About. a
> year and a half ago, I took it down separated it into several "smaller"
> segments so it could be moved. I am now trying to clean it up, put new
> hardware, etc. and get it ready to put back on the air. The problem: When
> it was first assembled several years ago, not enough (or maybe nothing) of
> anything was applied to allow for ease in disassembling. I have three
> segments that I have been unable to separate. I do not want to use a vice
> or any type of gripping tool that will mar and possibly damage the elements.
> Anybody out there have any suggestions?
>
> Tnx in advance,
>
> George, KI5BV
> mailto:geomitch@cei.net
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|