Towertalk
[Top] [All Lists]

[TowerTalk] Installing Connectors on LMR 500

To: <towertalk@contesting.com>
Subject: [TowerTalk] Installing Connectors on LMR 500
From: k2av@qsl.net (Guy Olinger, K2AV)
Date: Fri, 01 Oct 1999 17:47:25 GMT
The ones I have seen came sealed in a little plastic baggie with a
piece of paper (instructions) in it. The baggie made sure you got all
the parts. Who you get them from?

On Fri, 1 Oct 1999 13:19:55 -0400, you wrote:

>
>I have recently purchased some LMR 500 cable and UHF connectors.  The 
>supplier does not have any instructions for installing the connectors 
>onto the cable.  I will be making up two connectors this weekend & 
>would be interested in any tips that you might have regarding the 
>do's & don't for this particular type of installation.  The rear of 
>the fittings resemble N fittings and I am inclined to think that the 
>cable would be attached to the fitting as one does with standard 
>RG-213 and an N fitting.  Is this correct?
>
>Thanks for any info you may have.
>
>de Sig, N3RS

73, Guy
--. .-..

Guy Olinger, K2AV
k2av@qsl.net
Apex, NC, USA

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>